Justia Commercial Law Opinion Summaries

In 2003, several class action lawsuits were filed against automobile manufacturers and trade associations, alleging antitrust conspiracy, Bus. & Prof. Code, 167201, and unfair business practices, Bus. & Prof. Code, 17200, on behalf of individuals who purchased or leased new vehicles in California within a certain time period. The lawsuits, which were eventually coordinated, alleged conspiracy to restrict the movement of lower-priced Canadian vehicles into the U.S. market, to avoid downward pressure on U.S. new vehicle prices. After years of litigation, the court granted summary judgment in favor of the two remaining defendants, Ford U.S. and Ford Canada, concluding that there was not sufficient evidence of an actual agreement among Ford and the other manufacturers to restrict the export of new vehicles from Canada to the U.S. The court of appeal affirmed with respect to Ford U.S., but concluded that the admissible evidence was sufficient to demonstrate a material factual issue as to whether Ford Canada participated in an illegal agreement to restrict the export of automobiles. The court noted an expert economic analysis indicating that the manufacturers would not have continued to restrict exports during the alleged conspiracy period absent an agreement that none of them would break ranks and reap the profits available in the export market; parallel conduct by the manufactures during the same period; and deposition testimony. View "In re: Auto. Antitrust Cases I and II" on Justia Law

Cross Match claimed that defendants violated 19 U.S.C. 1337(a)(1)(B)(i) by importing articles that infringe or are used to infringe its patents. The International Trade Commission entered a limited exclusion order barring importation of certain optical scanning devices. In 2013, the Federal Circuit first vacated and remanded for revision of the order to bar only a subset of the scanners, reasoning that an exclusion order may not be predicated on a theory of induced infringement under 35 U.S.C. 271(b) where direct infringement does not occur until after importation of the articles the exclusion order would bar. In doing so, the panel effectively eliminated trade relief under Section 337 for induced infringement and potentially for all types of infringement of method claims. The Federal Circuit later granted en banc rehearing and upheld the Commission’s position. Because Section 337 does not answer the question, the Commission’s interpretation of Section 337 is entitled to Chevron deference. The Commission’s interpretation is reasonable because it is consistent with Section 337 and Congress’ mandate to the Commission to safeguard United States commercial interests at the border. View "Suprema, Inc. v. Int'l Trade Comm'n" on Justia Law

Gordon Auto Body Parts, a Taiwanese company, was one of several early entrants into the U.S. market for replacement truck hoods. PBSI eventually entered the market for certain replacement hoods but found that it could not match the prices of Gordon and other Taiwanese firms, with which Gordon had participated in joint ventures. Believing that Gordon and the other firms were conspiring to drive it out of business with predatory prices, PBSI brought antitrust claims against Gordon. The district court granted Gordon summary judgment. The Sixth Circuit affirmed, finding that PBSI failed to make any showing that Gordon’s prices were below an appropriate measure of cost. View "Superior Prod. P'shp v. Gordon Auto Body Parts Co." on Justia Law

Licensees entered into a licensing agreement with Safeblood Tech for the exclusive rights to market patented technology overseas. After learning that they could not register the patents in other countries, Licensees sued Safeblood for breach of contract and sued Safeblood, its officers, and patent inventor for fraud, constructive fraud, and violations of the Arkansas Deceptive Trade Practices Act (ADTPA), Ark. Code 4-88-101 to -115. The district court dismissed the fraud claims at summary judgment. The remaining claims proceeded to trial and a jury found for Licensees, awarding them $786,000 in contract damages and no damages for violations of the ADTPA. The district court awarded Licensees $144,150.40 in prejudgment interest. The Eighth Circuit reversed as to the common-law fraud claim and the award of prejudgment interest, but otherwise affirmed. Licensees produced sufficient evidence that the inventor made a false statement of fact; the district court did not abuse its discretion when it gave the jury a diminution-in-product-value instruction; and Licensees waived their inconsistent-verdict argument. View "Yazdianpour v. Safeblood Techs., Inc." on Justia Law

In 2008 Motorola agreed to make a good-faith effort to purchase two percent of its cell-phone user-manual needs from Druckzentrum, a printer based in Germany. After a year, Motorola’s sales contracted sharply. Motorola consolidated its cell-phone manufacturing and distribution operations in China, buying all related print products there. Motorola notified Druckzentrum. The companies continued to do business for a few months. After losing Motorola’s business Druckzentrum entered bankruptcy and sued Motorola, alleging breach of contract and fraud in the inducement. Druckzentrum claimed that the contract gave it an exclusive right to all of Motorola’s user-manual printing business for cell phones sold in Europe, the Middle East, and Asia during the contract period. The district judge entered summary judgment for Motorola. The Seventh Circuit affirmed. The written contract contained no promise of an exclusive right and was fully integrated, so Druckzentrum cannot use parol evidence of prior understandings. Although Motorola promised to make a good-faith effort, the contract listed reasons Motorola might justifiably miss the target, including business downturns. There was no evidence of bad faith. The evidence was insufficient to create a jury issue on the claim that Motorola fraudulently induced Druckzentrum to enter into or continue the contract. View "Druckzentrum Harry Jung GmbH v. Motorola Mobility LLC" on Justia Law

Between July 30, 2003, and August 31, 2003, Sunline imported eight entries of freshwater crawfish tailmeat from Chinese producer Hubei, which were subject to a U.S. Department of Commerce antidumping duty order covering freshwater crawfish tailmeat from China. The Hubei Entries were entered following approval by Customs of eight single-entry bonds that covered the estimated antidumping duties and designated Hartford as surety. The Hubei Entries were made during the pendency of Hubei’s “new shipper review.” After Hubei’s new shipper review was rescinded, meaning Hubei did not qualify for an individual antidumping duty rate, Customs liquidated the Entries at the 223.01% country-wide rate. After Sunline failed to pay, Customs demanded payment from Hartford, which filed a complaint at the Court of International Trade, seeking to void its obligations under the bonds because Customs had been investigating Sunline for possible import law violations during the period in which the bonds were secured and did not inform Hartford of the investigation. The Trade Court dismissed. The Federal Circuit affirmed. Hartford did not allege any facts that establish a connection between the investigation and Sunline’s failure to pay its antidumping duties after liquidation. View "Hartford Fire Ins. Co. v. United States" on Justia Law

The U.S. Department of Commerce published an antidumping duty order on wooden bedroom furniture from China. AFMC requested an administrative review of certain companies exporting such furniture to the U.S. in 2009. After Commerce selected it as the mandatory respondent, Huafeng provided Commerce with data related to its 2008 purchases of wood inputs from market economy suppliers relevant to the subject merchandise. Commerce assigned Huafeng a dumping margin of 41.75% using 2009 import data from the Philippines (surrogate values), a market economy, to value the wood inputs as the “best available information” under 19 U.S.C. 1677b(c)(1) because they were contemporaneous with the Period of Review, and the purchases identified by Huafeng were not. After remand Commerce again relied on the surrogate values. On second remand, Commerce determined that it did not need to reopen the record because the “best available information” analysis focuses on the purchase of inputs, not consumption, verified that the market economy purchases were actually from market economy suppliers, and assigned a new dumping margin of 11.79%. The Court of International Trade judgment sustained that valuation. The Federal Circuit reversed, directing direct the Trade Court to reinstate the valuation in the First Redetermination. View "Home Meridian Int'l, Inc. v. United States" on Justia Law

Roche imported BetaTab, a mixture containing beta-carotene, antioxidants, gelatin, sucrose, and corn starch that can be used as a source of Vitamin A in foods, beverages, and vitamin products. Beta-carotene crystalline makes up 20 percent of the mixture and is an organic colorant with provitamin A activity. Whether used as a colorant or provitamin A, beta-carotene must first be combined with other ingredients. Customs classified BetaTab under the Harmonized Tariff Schedule of the United States (HTSUS) subheading 2106.90.97 as “[f]ood preparations not elsewhere specified or included” and denied a protest. In the Court of International Trade,Roche argued that BetaTab was classifiable either as a “coloring matter” under HTSUS subheading 3204.19.35, and eligible for duty-free entry pursuant to the Pharmaceutical Appendix, or, alternatively, as a provitamin under HTSUS heading 2936. The Court ruled in favor of the company, reclassifying the product under HTSUS 2936. The Federal Circuit affirmed. Roche’s manufacturing process did not change BetaTab’s functionality as a provitamin or change the character of beta-carotene as a source of provitamin A. Addition of the stabilizing ingredients did not exclude the merchandise from classification under heading 2936. View "Roche Vitamins, Inc. v. United States" on Justia Law

Alcan imported Flexalcon, an aluminum-plastic laminate foil for food packaging with stringent shelf-life requirements, such as for the military’s Meals Ready to Eat. Flexalcon is a four-layer material for the base of a package and a three-layer material for the lid. Each configuration has a thin layer of aluminum foil between layers of plastic. Aluminum prevents penetration of light, water vapor, oxygen, and other contaminants that would degrade food contents. The plastic gives the packaging tensile strength and increases heat resistance to withstand sterilization and sealing; it prevents cracking and piercing. Alcan listed the material as classifiable under the Harmonized Tariff Schedule of the United States (HTSUS) subheading 7607.20.50, which carries no duty rate and covers “[a]luminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: Backed: Other.” Customs reclassified the Flexalcon under subheading 3921.90.40, with a 4.2% duty rate, covering “[o]ther plates, sheets, film, foil and strip, of plastics: Other: Flexible.” Alcan unsuccessfully protested under 19 U.S.C. 1514–1515. The Court of International Trade upheld the classification. The Federal Circuit affirmed, reasoning that the competing aluminum-foil heading defers to the applicable plastics heading. View "Alcan Food Packaging v. United States" on Justia Law

uPI and Richtek design and sell DC-DC controllers that convert direct current from one voltage to another, and are embodied in chips for downstream devices such as computer motherboards. uPI was founded by former Richtek employees; its chips are imported into the U.S. either directly or as incorporated in downstream devices. Richtek complained to the International Trade Commission that uPI misappropriated Richtek’s trade secrets and infringed Richtek’s U.S. patents, in violation of the Tariff Act, 19 U.S.C. 1337. uPI offered to enter into a consent order and to cease importation of products produced using or containing Richtek’s trade secrets or infringing Richtek’s patents. Over Richtek’s objection, the ALJ entered the consent order substantially as drafted by uPI. The Commission terminated the investigation. A year later Richtek filed an Enforcement Complaint. An ALJ distinguished between products that were accused in the prior investigation and products allegedly developed and produced after entry of the Consent Order, finding violations as to the formerly accused products and that the post- Consent Order products infringed two patents, but were independently developed and not produced using Richtek’s trade secrets. The Commission affirmed with respect to the formerly accused products and reversed in part with respect to the post-Order products. The Federal Circuit affirmed concerning the formerly accused products, but reversed the ruling of no violation as to the post-Consent Order products.View "UPI Semiconductor Corp. v. Int'l Trade Comm'n" on Justia Law